Tag Archives: ice dams

Freezing Cold Ice Dams Flooding Heat Loss

Ice Dams

Due to the extreme sub zero temperatures and the recent  Nor’easter” Double Bomb Cyclone” here in the Boston area and coastal region many homeowners have experienced flooding including power outages, loss of heat, bursting and frozen water lines. The septic water drain pipes are even freezing leaving homes and businesses to not have toilet facilities and running water.

Gear up for the ice dams next in the coming weeks! The temperatures will rise from sub-zero to up to 50 degrees or more in the Boston and coastal areas. The severe temperature swings will begin to cause ice dams creating damaging affects to your home or business.

People are discovering how cold there home or place of business has become because of the extreme cold swings. Oil fills ups in our area are seven to ten days behind so stay safe and check on your neighbors and pets.

The utilization of Thermal Infrared Camera helps to discover hidden areas of moisture or cold drafts due to temperature differential of the surfaces. It can even help with frozen pipes in the basement or crawlspace before they may burst.

Ice Dams-Roof Leaks and Mold



Did you know that ice dams can cause mold problems?

Frozen ice and snow on top of roofs and gutters are creating havoc for homes in New England and the greater Boston area. With cold temperatures in freezing climates then an unexpected 40 to 60 degree day causes a lot of melting of the ice and snow which enables mold growth, roof deterioration of the plywood, wood rot in the fascais boards behind the gutters. The water and moisture can travel through the attic area, dormers, wall cavities and down into lower levels even down into the basement and first floor.

Some ways to detect mold: 

1. See if water spots and dark stains are noticed and perhaps wet.

2. Look for visible stains such as mold on the surfaces of the ceiling, walls of the living areas, floors, carpets, attic plywood sheathing, attic sidewalls,  floor joist, wet insulation, and excess moisture or humidity

3. Check for moisture or high relative humidity over 65% and higher.

4. Smelling unusual irritable odors such as musty or moldy where wall cavities or insulation can be wet inside the walls, but dry on the outside wall. High relative humidity or moisture may be the culprit.

5. Other ways to detect mold is to hire a competent professional with the right tools such as conducting mold sampling the air or visible mold with tapes, swabs, or bulk.

6. Utilizing moisture meters, Thermal Infrared Imaging camera, boroscopes, etc.


For a professional mold inspection and mold assessment call:

Andy Provitola CMC-Certified Microbial Consultant
Environmental Resources LLC
Headquarters
316 Washington Street
Norwell, MA 02061
781-248-9975

www.airenvironments.com

Continue reading